Monthly Archives

december 2025

dec 09
0

Video: 16 specialtanke rejst på Island

By | Nyhed | No Comments

A-Consult har i efteråret 2025 afsluttet fase to af et omfattende projekt for Laxey på Island.

Til Laxeys landbaserede lakseopdrætsanlæg i Vestmannaeyjar har A-Consult leveret 16 Aqua-Tank beton­tanke, designet med fokus på bæredygtighed og høj ydeevne. Tankene, som er præfabrikerede og efterspændte, er udformet til at sikre enestående holdbarhed, minimalt vedligehold og optimale forhold for akvakultur.

Projektet omfatter opførelsen af i alt 16 tanke, hver med en størrelse på 13 x 28 meter, som nu står færdige i det karakteristiske islandske landskab.

INFORMACJE TECHNICZNE

 

Hidden Strength

The Aqua-Tank is constructed using high specification concrete panels held together by a series of circumferential 7 wire PE-sheeted grease impregnated tendons. The tendon is coated in a highly corrosion-resistant grease conforming to the recommendations of both the American Post Tensioning Institute and the FIB. The PE-sheeting is formed by the continuous hot extrusion of high density polyethylene or polypropylene to a minimum redial thickness of between 1.00mm and 2.00mm, again conforming to recommendations of both the American Post Tensioning Institute and the FIB.

 

Panel Seal

The Aqua-Tank panel seal is unique due to the use of a patented, WRAS approved, substantial EPDM Rubber strip, which absorbs the movement to which every tank is subjected; e.g. seasonal weather changes, variation in liquid level and external pressure from back-fill. Its elasticity is resistant to ammonia and ultra violet light, and with a life expectancy in excess of the concrete panels themselves results in no maintenance on this area for the structures total design life.

 

Panel to Base Seal

The panel to base seal is typically performed by applying a rebate solution to the base slab. The A-Consult panels can be provided with dowel bars if required. Below shows a typical ring beam section showing how an effective seal is achieved by utilising the step in the base slab along with the correct placement of three strips of hydrotite. Additional security can be achieved during the construction of the in-situ ring beam by forming a small rebate to the inside face and then by filling this rebate with an elastic polyurethane sealant after the ring beam has cured.